Creating a new virtual machine.
After downloading the latest version of the image (link), specify the ISO file with the installation distribution.
Click "Continue"
Select the type of operating system Other Linux 5.x and later kernel 64-bit
Click "Continue"
Choosing the Legacy bios type
Click "Continue"
Click "Finish"
After creating a virtual machine, wait for it to load
Go to the section "[3] Reboot the system"
Choose "[2] Shutdown"
After shutting down the virtual machine, go to Settings
Select "Add device"
Select "New Hard Disk"
Click "Add..."
Choose the size of the hard drive (we recommend at least 50 GB)
Click "Apply"
1 hour of recording conversations takes approximately 14mb on disk.
Start the virtual machine
Select "[8] Install"
Enter the name of the disk on which MikoPBX will be installed
In our case - sdb, enter its name and press Enter
Confirm the disk selection: enter y
Select a disk for recording conversations
In our case - sdc, enter its name and press Enter
The system will reboot and MikoPBX will be ready for use.
The PBX displays the IP address of the station by which you can connect to it
Enter the IP address of the station in the browser bar and the MIkoPBX login menu will open
The default username and password is "admin"
