Sessiontalk Setup

1. Download and open the SessionTalk app on your smartphone. You will be prompted to create an account:

   Select "Generic SIP"

1. Enter the following details:

• "Account Name" - any name of your choice

• "Display Name" - your full name

• "UserName" - the internal extension number from the employee configuration section

• "Password" - SIP password from the employee configuration section

• "Domain" - MikoPBX server address

1. In the "Advanced" section, set the priority for "WiFi Codecs" and "Mobile Codecs"

1. In "Advanced" → "Miscellaneous" → "Incoming Caller Id", select "P-Asserted-Identify"

1. Switch the checkbox "Enabled" to "On" and wait for the registration to complete.

Successful registration will be indicated by the message "Registered" in the app interface, as well as "Online".

1. Download the softphone installer from the official website using the link. Install it following the instructions of the installer.

2. Launch the installed softphone. You will see the following window. It prompts you to enter login and password.

3. Login into Zoiper

login - <extension number>@<PBX Address>

password - internal number password.

Go to the PBX web interface.

Go to the employees section, select the desired internal number and copy the necessary data.

Click Login.

4. On the offer Fill In your hostname and select provider from the list, make sure that the address of your PBX is inserted in the field and click Next.

On the option Authentication and Outbound proxy without cocking the checkbox, click Skip.

On the configuration testing page, without waiting for the end, click Next. Agree to the warning.

Successful authorization is indicated by a green flag to the left of the current account.

Also, the status Online should be displayed on the PBX for this internal number.

1. Download the softphone installer from the official website at the link. Install it by following the instructions of the installer.

2. After installation, open MicroSIP, click on the button in the upper right corner to open the menu.

1. Choose "Add account"

1. In the "Account name" field, enter an arbitrary name for the account

1. In the "SIP Server" field and in the "Domain" field, enter the IP address of MikoPBX to which the connection is being made

1. In the "Username" field and in the "Login" field, enter the "Extension" from MikoPBX

1. In the "Password" field, enter the "SIP password":

1. Click "Save"

Thus, we connected the MicroSIP softphone to MikoPBX. Confirmation of successful connection is the inscription "Online" at the bottom left, as well as the inscription "Online" in MikoPBX

1. Follow the link and sign in.

2. Go to the Voice and Video section.

1. Click on "Add Voice Configuration".

1. Choose "Configure SIP Settings".

1. On the next step, fill in the connection parameters to MikoPBX. The default port is 5060.

1. Click "Save and close".

1. The account setup is complete. Now, download the app by going to "Download Client Apps".

1. Download the app and log in.

1. The softphone will automatically register with the PBX, and next to the employee's name, the status "Online" will appear.

1. Download the softphone installer from the official website at the link. Install it by following the instructions of the installer.

2. After installation, run PhonerLite. Creating a new SIP account:

Go to "Configuration" -> "New"

1. Select "Manual Configuration"

In the "Domain/realm" field, enter the IP address of the MikoPBX you are going to connect to

Click the arrow to continue

1. In the "User name" field and in the "Authentication Name" field, enter the "Extension" of the employee from MikoPBX

1. In the "Password" field, enter the "SIP Password" from MikoPBX

Click the arrow to continue

1. Click on the check mark to continue

The green indicator at the bottom indicates successful authorization. Also, the status Online should be displayed on the PBX for this internal number.

1. Download the softphone installer from the official website via this link. Install it by following the installer instructions.

2. In the interface, create a new account.

1. Fill in the server address (IP address of your MikoPBX), login (employee's internal extension number), and password (SIP password from the employee settings).

Successful authorization is indicated by a green flag next to the current account. Additionally, the status for this internal number on the PBX should show as Connected.

PBX Configuration

To ensure the proper functioning of WebRTC in most browsers, a trusted SSL certificate is required. We recommend using the additional module Let's Encrypt Module. For the module to work, the PBX must be accessible via a public IP address.

1. Create a new employee account.

2. Option 1. For each internal number, set it to work only over the RTC protocol. In the "Advanced Settings" section - "Extra options", add the following options:

[endpoint]
webrtc=yes

Click "Save". From this moment, this internal number will work only using the WebRTC protocol.

Option 2. Set up all internal numbers to work both via PJSIP and WebRTC protocols. To do this, go to System → General Settings → SIP and enable the "Use WebRTC" toggle switch.

1. In MikoPBX, go to Network & Firewall → Firewall, and add the subnet 0.0.0.0 with a mask of 0.0.0.0. Enable access via AJAM.

1. Go to System → General Settings → AMI & AJAM. Ensure the "AJAM Port with Encryption" is set to 8089.

1. In the General Settings section, specify the STUN server address. For example, stun.sipnet.ru.

1. Open the link in your browser: https://PBX_ADDRESS:8089/asterisk/ws. Use Chrome, as other browsers may have issues. If the certificate is self-signed, you might see a warning "Connection is not secure", ignore it and click "Proceed to the website."

You should see the following message:

If Asterisk responds, the setup was successful.

WebRTC Client Setup

1. Go to the website https://sipml5.org. You will be redirected to https://www.doubango.org/sipml5/. Follow the link "Enjoy our live demo".

2. Set up the WebRTC client:

In the "Public Identity" field, enter the following template:

sip:INTERNAL_NUMBER@PBX_ADDRESS

When you enable the Use WebRTC option

sip:INTERNAL_NUMBER-WS@PBX_ADDRESS

Click on the "Expert mode?" button and proceed with the additional configuration:

In the "WebSocket Server URL" field, enter the following format:

wss://PBX_ADDRESS:8089/asterisk/ws

Click Login. You can now start making calls.

1. Download the softphone installer from the official website at the link. Install it by following the instructions of the installer.

2. After installation, open Jitsi, go to Tools → Options.

1. Creating a new account:

1. Choose SIP as the network

1. As the SIP id, enter the "Internal number" of the employee

1. Enter "Password for SIP" as the password

1. Click "Advanced" to display additional settings

1. Go to the "Connection" section:

1. In the "Registrar" field, enter the IP address of MikoPBX to which the connection is being made.

1. Click "Next"

1. Click "Sign in"

Thus, we connected the Jitsi softphone to MikoPBX. Successful authorization is indicated by the status "Online". Confirmation of successful connection is the inscription "Online"

1. Download the softphone installer from the official website at the link. Install it by following the instructions of the installer.

2. The following window will be displayed at the first launch:

1. Accept the agreement and click "Use SIP account"

1. In the "Username" field, enter the internal number of the employee

1. In the "SIP Domain" field, enter the IP address of the MikoPBX you are going to connect to

1. In the "Password" field, enter "SIP password"

1. Click "Use"

The green indicator on the top indicates successful authorization. Also, the status Online should be displayed on the PBX for this internal number.

This is the simplest client for users of Apple products. You can download it from the link.

1. In the "Full Name" field, enter the name of the employee that will be displayed in the application

1. In the "Domain" field, enter the IP address of the MikoPBX to which the connection is being made

1. In the "User Name" field, enter the internal number of the employee

1. In the "Password" field, enter "SIP password"

1. Click "Done"

The green indicator on the top indicates successful authorization. Also, the status Online should be displayed on the PBX for this internal number.