Updating from the web interface
Update option from the web interface
Last updated
Update option from the web interface
Last updated
In some sections of the interface (e.g., Extensions), the current version of MikoPBX is displayed in the lower right corner.
In the PBX web interface, go to Maintenance → PBX update.
If there are newer versions of the PBX available, they will be displayed in the Online updates available table, with the version number in the first field and the list of changes in the second.
We recommend performing updates sequentially without skipping releases.
There are two update options: online update and update using a downloaded img file.
Be cautious! If the system is installed on the same disk where call recordings are stored, there may be difficulties with the update. See forum
A warning window will appear. Click Upgrade.
The PBX will download and apply the updates, and then reboot.
Please note that this method can also be used to roll back to a previous version.
The img file will start downloading. Wait for the download to complete.
Then click Apply the update, and in the warning window, click Upgrade.
The updates will be applied, and the PBX will reboot upon completion.
Updates are downloaded to the PBX and applied immediately. To update this way, click the button for the desired version.
To update using this method, click the button for the desired version.
Then click the button and select the downloaded img file.
