English

Connecting to a PBX using WinSCP

  1. Download the WinSCP installer from the official website at the link

  2. Install the program

  3. After installation, the main menu of the program will open

  1. Host Name (or IP address) — MikoPBX IP address Port — the default port for SSH connection is 22 User name — always specify root Password — SSH password of your MikoPBX

  1. Before connecting, you need to allow password authorization in the MikoPBX web interface, as well as set a password for connection: to do this, go to "General Settings" -> "SSH"

  1. To connect, click "Login"

  1. After successful connection, the MikoPBX root folder will open for you

Last updated