Reboot
Description of section functions
Last updated
Was this helpful?
Description of section functions
Last updated
Was this helpful?
The system shutdown/reboot menu can be found in MikoPBX by clicking on "Reboot" in the "Maintenance" section.
When you open the page, a list of active calls to the PBX will be displayed. The start date of the call is displayed, from whom and to whom the call.
As long as there are active calls, the reboot and shutdown will not be available via the web interface.
Restart the PBX - the command starts restarting the station.
Turn off PBX - completes all processes and disconnects the station.
You can restart the station via the console menu. To do this, select the section "[3] Reboot the system"
If you want to restart the station: press "[1] Reboot MikoPBX"
If you want to turn off the station: press "[2] Shutdown"
The system will reboot.
In case of an emergency restart of the PBX (for example, power outage), it may be necessary to check the disk for errors.
In the PBX console menu, enter the command "[9] Console(Shell)" and press Enter.
System launch the MikoPBX console.
Enter the command reboot. Press Enter.
The system will reboot with a disk check.
